Model TC-30 Temperature Controller

Overview

The Model TC-30 Temperature Controller is designed to precisely control the temperature of a Vacu-Cell^TM incubation chamber or a Vacu-Cell^TM microscope stage holder.  The heater provides a heavily filtered DC output at a maximum power of 30 Watts for noise-free temperature control.  A highly visible digital temperature readout indicates either the set-point temperature of the controller or the measured temperature of the sensor probe. 

The TC-30 is equipped with an adjustable gain control. The gain control is used to adjust the feedback system and the dynamic temperature response of the Vacu-Cell^TM.  Although the controller is essentially noise-free, a TTL-controlled inhibit input is also provided. This input control can be used to temporarily block power output to the heater element to permit high-sensitivity measurements.  A visual "stair-case" display is also provided to indicate output power. 

Included with the Model TC-30 is one cable, to connect the controller to the Vacu-Cell, and one temperature sensor probe.

Vacu-Cell^TM Chambers

We manufacture a variety of Vacu-Cell^TM chambers that can be used with the TC-30 temperature controller.  Our Vacu-Cell^TM perfusion chambers work with both circular and rectangular coverslips.  You can examine them on our product overview page.

Ordering Information, TC-30 Temperature Controller

(Specify 120V or 220V when ordering)

Download Product Specification Sheet

Pricing Information